This is a box designed to be worn at the wrist like a normal watch, that I designed to house the BITalino R-IoT (https://bitalino.com/en/r-iot-kit) and BITalino (r)evolution Freestyle (https://bitalino.com/en/freestyle-kit-bt) hardware assemblies.
It includes the box, an adjustable wristband and a filler to cover the charging port. All the parts are 3D printable, with some components printed with PLA and others with TPU (e.g. the adjustable wristband).
To use BITalino R-IoT with this box, it is recommended to do the assembly of the modules as shown in the post-printing photos. In this example, the device assembly includes a memory card.
https://www.beeverycreative.com/beesupplies/ PLA, TPU
1 - When positioned vertically for printing (as shown in the rendering), the box needs support in one of the sides. To print in such orientation, make sure that the piece is in the exact same position (with the side that has no holes facing the 3D printer bed).
2 - The box, the cover and the button are printed in PLA. The bracelet and the USB cover must be printed in TPU for flexibility.
Recommended assembly for BITalino components:
Position of the assembly in the box: