Pandora EXT Plug Housing
by Infinity553, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This will fit the OpenPandora's EXT- Plug and a little PCB for a DIY TV-Out Cable.
It's made to fit a 11X11mm PCB and the Plug.
I made a HowTo for the TV cable and uploaded it as a PDF in Germand and English!
Added a Zip file with a Postiv of the Plug so that you can put it in to your own design.
Print it twice, Put your components in and glue it together.
You have to Solder thin cables from the EXT-Plug to the PCB,
hhen you can Solder the Thick TV Cables on to the PCB.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Pandora EXT Plug Housing by Infinity553 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Infinity553 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Infinity553 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).