This version splits the mount into a base and cover. The base is glued with goop to the Mini Drak after cutting off the nose.
Cut the nose about 15mm from the edge of the battery cover (please check with width and height from your printed base before cut)
The cover have two version, A and B. The B version has the keyway in both parts.
SLDASM and SLDPRT are SolidWorks 2018 files, if you only want print it you only need the STL
- Morro Runcam Split 2S - Superior B updated the keyway for fit better
- Naming A version
- Morro Runcam Split 2S - Inferior A&B updated minor cosmetic changes
- Morro Caddx Turtle A&B for Caddx Turtle Cam, base is the same that Runcam --> NOT TESTED
How to fit the nuts in
For fitting the nuts use a soldering iron or hammer (be carefull)
Nuts should be glued in place to they don't slide away from the hole