Spreader Endcap 3/4
by 172heavy, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an endcap for a modular spreader bar. Two Endcaps + 1 3/4" wooden dowel with get you a great model spreader bar.
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/kSMPkNijSJ1
Print .2 mm layers Print two copies, and insert 3/4" wooden dowel between the models for a great 3d model of a spreader bar. Once it is printed you can glue it together with superglue. Not sure what the capacity is.......
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Spreader Endcap 3/4 by 172heavy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving 172heavy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 172heavy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).