I was looking for some tent pegs for hard ground and found that they consist of a steel spike or nail and a plastic top.
I decide to make my own using my other tent peg as a starting point for the head. http://www.thingiverse.com/thing:135548
I printed mine in glow in the dark PLA and used 6mm by 150mm round wire nails from Screwfix which cost £3.59 for 1KG which was 30 nails. http://www.screwfix.com/p/round-wire-bright-nails-6-00-x-150mm-1kg-pack/13869?_requestid=151245
These are a common size for nails in the UK so might be found for a better price.
The heads are 6 grams each so 180 grams for a set of 30. At a plastic cost of £20 per KG its around £3.60 so giving a total cost of aprox £7.20 as set.
Please feel free to mod or print a set but please don't sell them on.
I will be off camping soon and will give them a go but with the English weather as it is I think I will be using my other pegs for soft ground.
I printed mine on a reprappro mendel In glow in the dark PLA at 0.3 layer height and 40% fill .
I have included a file for a single print and 10 at a time that will fit on a 140mm X 140mm bed.
After printed I run a 6mm drill down the hole to clean it out and it fit nice over the nail.
More from Outdoor & Garden
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving mouserunner a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.