When I bought my camper, the vendor told me he was going to replace the lateral drawers of the refrigerator. After many weeks, he said it was impossible to do it, so I decided to build it drawing some components and using wood and plexiglass for others.
For each drawer you need to print the 2 lateral components named ...DX and ...SX.stl. Then you need to print the 2 supports.
I tried to build a drawer compatible with different version of this refrigerator.
The most important thing is the lateral groove but, for the rest, you can enlarge or not the drawer using some thread rods. I used 4mm threads for the main lateral pieces and 3 mm one to maintain the supports in position.
I preferred to not print the bottom and the back but to use, respectively, transparent plexiglas and 4mm wood.
The back is needed to maintain lateral components always in line and this will avoid the drawer to disconnect from the refrigerator door.
Obviously, you can dimension the drawer also cutting the bottom and the back components. This will allow you to adapt the module to different models of this refrigerator (probably also to other refrigerators as well).
If you like this object and want to see something more, please, visit the main web site that you can find here: http://www.bvRobotics.com