Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Sa1Wales

BL and 3D Touch Harness Geeetech A10 V3 Version(Pin Support)

by Sa1Wales Feb 15, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

friend was passing me that with the BLTouch. The problem was that the cables of the connector were cut from the factory and I had to replace the connector of 2X6 PIN for bad contact

If your pin keeps dropping, just make sure you deactivate the following setting in your Marlin Firmware:

Configuration.h:
//#define DEACTIVATE_SERVOS_AFTER_MOVE

Commenting this out like above will keep the BL-Touch powered-up all the time and your pin will never drop.

Sadly after checking my Config that is already //#define DEACTIVATE_SERVOS_AFTER_MOVE, It only happens when the printer starts causing a vibration and the pin detaches from the magnet.

I have found a lot having the same problem in different forums and different printers, and this is my first 3D printer so I could only make it for the A10 and the version of the A10 I have.

Thanks for the Info Miunske but sadly didnt help me, But Much appreciated.

Humm....mine is pulled up right away again...see: https://photos.app.goo.gl/ywhPDdfFcvKD8sPu5
But maybe it fixes your problem when you change the speed of the head for a few percent.