Update 3/29/2019: V3 chassis - passive wheels are now mounted with nuts instead of screwing them directly into the plastic. It now has an adjustable wheelbase so the issue where the tracks would be too tight is resolveded.
Update 3/10/2019: New V2 chassis - it is a little bit more refined, it now has a magnet-mounted canopy and space to put lead in at the bottom for a lower center of gravity when climbing, designed new wheels because I had issues where the tracks would slip off the wheel.
To join the track links I used 1mm paper clips.
To attach the servos to the chassis the two screw tabs on the servo need to be cut (it's shown on one of the pictures). Hot glue the servos in place.
To attach the two wheels to the 9g servos take the arms that come with the servos and remove the arm part so you are left with only the round thing (also shown in the same picture).
the servos need to be modified for continuous rotation all links are affiliate links
More from R/C Vehicles
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving JaniKabalin a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.