Loading
derandi3d

Ender-5 Bed Strain Relief

by derandi3d Feb 22, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

What happens when you adjust the bed to level?

Normal leveling is no problem.
But if you put a 3-5mm glas bed on top and you do not pre-level it with a longer screw on the end-switch the wires becomes possibly too much bended.

I made a redesign to avoid too small bending radius.
As you can see on my foto: +-5mm from normal level are now no problem.

nice :D Another solution could be an "upside down" ender 3 style one that goes over the spring, not under like the original. that way it travels with the bed.when leveling but keeps the solder joints from bending