Relampago Rev E7a spintop
Needs Spintastics tip. Brass is best but you can use steel if that's all you have. It is a press fit so depending on your print, a bit of sanding could be required to seat tip. If loose just shim with plastic bag.
This is designed for regerneration play.
Print 85% fill or more.
Print upside down.
Needs support in center but not on outside.
Printed using PETG but ABS works well.
Use a standard size string like would be used on Spintastics larger tops.
Video of me using this top in France
More from Toys & Games
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving josejmadrigal a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.