- If you are having trouble with Simplify 3D try the alternate Tri2-SharpRHI-V2.stl file
- Added round corner version Tri^2-Rnd-Crnr.stl
This design is intended for corkscrew, vase mode, single wall printing.
I used Prusament PLA, and eSun Pla+.
.2mm layers. Use 5 or 6 bottom layers, zero top layers.
Use ballast for stability; marbles, small river rock.
You can also use 2 walls thick. 5 or 6 bottom layers, no top layers, no fill, for a sturdier and more water tight piece.