by sylvar75, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A nice Tyrannasaurus skeleton project. I have printed mine to make a nice desktop model. I'm going to upload the photos as soon as possible. But I'm sure you find better way to use it. Good luck.
All parts were named, numbered and signified which one belongs where. Also you'll find complete T-Rex model which you can figure out which part should come together with which one.
When printing parts, be patience and take a notes. I also uploaded blueprints which have specified parts name on it.
Technically, I've glued mine with cyanoacrylate adhesive but failed. If you print these models out of PLA, I recommend using "Hot Melt Trigger Glue Gun" which can be found commonly in local stores or follow the links below;
Actually I didn't have a chance to print this with ABS. So, I can not say which glue is better with ABS.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
T-Rex Skeleton by sylvar75 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving sylvar75 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure sylvar75 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).