New Files 5/22/19
Uploaded a V2 of the sonic lance that includes the following changes.
-Mounting for 4 LED lights
-Separated window on top so that it can be printed translucent and illuminated
-Added mounting hole for 12mm square pushbutton to activate it.
Completed Stage 1
This is the first prototype for the 6th Doctors sonic lance. Comes in 3 pieces and screws together with four m3 screws from the bottom. The unit is hollow to accommodate stage 2 electronics. I printed the red tip using a Geeetech A10M printer mixing 88% Clear PLA with 12% Red Pla to achieve a translucent effect for the stage 2 lights.
(In Progress) Stage 2
I have chosen to remove the electronics from the 12th doctors sonic screwdriver and install in this sonic lance. That will give it multiple light and sound modes. Will also improve the screen accuracy and overall looks.
(Pending) Stage 3
Painting and Finishing
The top piece will require supports.
The bottom does not require supports, unless you decide to flip it upside down to print.
Orient the tip to point up and print with a 88% clear 12% red PLA mix or with a translucent red PLA