anchor spek

by shura2000 Feb 23, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Comments deleted.

please separate the pins and "loop" into separate files...

thank you, i love this design. what specs do you use when you print? (like fill for specific part) i printed the anchor at 100 percent and the pins at 94 percent and that made the pins perfect in size and just tight enough. i had to print the pin set twice because i could not separate the loop to keep it at 100 percent.

I do not remember already. but there were no problems.

i printed 2 sets one at 100 for the loop. and one set at 94 percent because the pins from 100 did not fit. maybe you sanded your pins down, i usually dont sand parts, i adjust the print to have a perfect fit. also when i say the loop i am talking about the one that is at the very top attached to the "shaft" and not the chain loops. the chain loops are perfect.

not. did not process anything

Звено Кентера забыл.

Про смычку помню. Просто лень уже было. Может дорисую...