Print Bed Scraper

by Luked Nov 14, 2012
Download All Files

Thing Apps Enabled

Please Login to Comment

how is it in removing the prints from the bed? did you use PLA or ABS?

Printed it on a flashforge replica, i aborted before it built the handle as i wanted a flat flexiableish tool.

I print it flat as is in the image. I like that because of the layers the edge of the blade part is more less sacrificial and can be broken off as it wears away.

P.S print at 75% and trim the nose a bit- you now have a backup windshield ice scraper on your keychain :)

Made one on my Solidoodle at 75% size.  Had to run it through Netfab (local version)  and Slic3r kinda butchered the taper a bit at .3mm.  It will work though!  My old one was getting a bit worn. Cheers

How will you scrap it off the bed? :)

you could print two and each scraps the other

{Mind Blown}
Probably the best comment on this site.

 Why the hell I didn't think about that? :D

If you want it to be strong a get the job well done you could rotate it and print if vertically with the long side on the bottom.