Just FYI this is indestructible and should weigh 5-6 grams depending on the print fill.
I recommend Printing:
4 of the "twiggy 1103 4 Feet skirted.STL"
1 of "twiggy 1103 4 Core.STL"
the version 4 files have more consistent thickness and thicker 0.8mm walls so should print better on most slicers.
Increasing the Line overlap can help if gaps form in the Gcode.
the "Core" requires GLUING(to prevent sliding), hinge glue or super glue should work well
Used 2mm carbon fiber rods from hobbyking. Cut to 120mm
The Battery holder is for use with the "twiggy_1103_3_Body_All_stacks." version only, as it has a 20x20 mounting pattern.
You can find the canopy on my profile
Let me know if you have issues with printing the thin walls(you should get 2walls in thin areas) and I can change the thicknesses to suit you extruder thickness