PLEASE NOTE; THIS IS A WORK IN PROGRESS. SORRY DON'T KNOW HOW TO LABEL AS SUCH!
WITH THAT, THERE ARE FITTING ISSUES. THE TOLERANCES ARE TO TIGHT FOR CORRECT FITTING OF THE PIECES. CURRENTLY WORKING TO CORRECT.
This is for a RunCam HD2 to be mounted within a 4 inch High Power Rocket Body Tube. The RunCam HD2 is a light weight, low profile and inexpensive action camera capable of capturing good video. link below
It's meant as a low profile camera bay.
Also, features printable button designed for the use of functions power on/off as well as record start/stop.
Modeled to fit LOC Precision 4 inch Rocket Tube. based on Dimensions from Apogee Rockets website. https://www.apogeerockets.com
Here's a link to the camera at Amazon: https://www.amazon.com/Runcam-Camera-Remote-Control-Camcorder/dp/B019175DMW/ref=sr_1_3?keywords=Runcam+2&qid=1551755046&s=gateway&sr=8-3
My 1st/Upload/Time using Fusion 360.
**NOTE: I believe sanding will be required to get to fit as the tolerances will be tight.
I'm choosing to print at that Resolution(and 15%infil) for good adhesion/strength and for ease of finishing(some sanding and a couple coats of primer and paint and I think its pretty good)
I do believe that .2 Resolution would be no big deal as well. definitely quicker and a bit lighter if being picky ;)
NOTE1st print I chose to have the inside of the camera bay down, and being the bottom of the print with needing supports to complete. It left the inside too rough for my liking. Next print I will flip it around 180deg and have the camera slot facing up, this way it's smooth and the two pieces will marry together much better.
Overview and Background
Two Piece Camera Bay
2 Piece Camera bay for a Runcam2
10-15% infil to keep unit light
I will be printing soon!!
4in Diameter rocket or equivalent Tube
2-3mmX20mm socket head machine screws
2-3mm hex nuts
CA/Super Glue(optional-secure button cap)