This is a fun awards metal that you can customize for your sporting even. The example here was for a group of seniors year end shuffleboard party with awards going to the top players.
I included image files that I used to customize the metal for our event. I use 3D Builder to add the image file for modifying the blank metal. All you have to do is output text to a image file. Use a program like 3D Builder to add the text to the blank metal file and output it to a STL.
The blank has 2019 on the back side.
For my Tevo Little Monster I run this Priline PLA at 215°C and a bed temp of 65°C. Speed is 70mm/sec. This Priline PLA filament really sticks to my glass bedplate. I thought I would be smart and not use stick glue, just clean glass. Don't do it with Priline. It was almost impossible to remove on bare glass. All in all I like the results with Priline. I normally order it from Amazon. It runs about $15 for a 1k roll.
Adding Ribbons To Dress Them Up!
After printing this metals, the large loop allows a ribbon to be added to allow these to be placed around the neck of the champions. We used low cost dollar store ribbon.