This is a remix of Jimustanguitar's awesome case for the RRD Full Graphic LCD.
You can find the cradle for this at the original link above, this is only a remix of the case.
This adds a bezel that snaps into place to cover the metal LCD frame, which I found necessary after I zapped my display (static discharge) on the exposed metal bezel of the LCD. Fried the display so I thought "I'd better not do that again" (duh). This thing completely covers the exposed metal surfaces, which should protect it from further stupidity on my part. It also uses M3 inserts for the screws.
The spacers should go in so the squared part is at the top and it should not stick out from the edge of the LCD, see the pics.
You will need the following hardware for this:
M3x16mm screws (qty 4)
M3x12mm screws (qty 4)
M3 inserts (qty 8)
If you need to mount the screen at an angle, I made a mount that works with Jimustanguitar's original holder here (this is how I am using it in the pics):
Please note that the STP files I have uploaded are not from Jimustanguitar's original files, but I used his STL's to get the dimensions for the solid models I used. Therefore the files may not be perfectly the same as his, but from what I can tell they are compatible (but I used M3 inserts).