This is an even more simpler visualization of one of the two puzzles for Tomb of Annihilation, this time Area 4 / 4a related to Map 5.1 Rotten Halls in the Tomb of the Nine Gods. Area 3's puzzle can be found at https://www.thingiverse.com/thing:3436237
Please note that this does not contain the skulls that are described to be part of the overall slate.
The plate itself is designed to work with a 50% size version of the Tomb of Annihilation Trickster God Disks by midapa found at: https://www.thingiverse.com/thing:2924039
The size reduction helps keep the printing volume down and the disks are still perfectly readable, roughly the size of a grid square.
Please note: the discs are not included, please download them from the midapa link directly.
Sunlu PLA +
This is a very straight forward print. I printed it laying down. You could theoretically print it standing up for increased surface qualities, but might need supports then
Make sure you print the discs with the same printer you print the puzzle plate with. It fits exactly when done that way (remember the discs need to be 50%), but due to tolerances, switching printer might lead to small deviations.
For the sample print in the picture, I accidentally had infill set to 25% - that's absolutely not necessary though. The previous version was printed at 20% and you'd probably be able to do less easily