Inspired by BennyBoyW's Geeetech A10 BLTouch Mount I wanted to be safe from my clumsy moves and create a stiff version which is aligned in a well-defined way, so that the BLTouch always stays in position, almost no matter how hard I hit it accidentally and frequently :-)
As you can see I have connected it directly to Geeetech's Extension Board using the
Extension Board Mounting Plate
As a goodie I've added a few holes for the cable.
By design your config for Marlin should be:
#define X_PROBE_OFFSET_FROM_EXTRUDER 0
#define Y_PROBE_OFFSET_FROM_EXTRUDER -33
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1
Of course, this can vary depending on your sensor and printer, but you can simply adjust these variables in the OpenSCAD source file:
front_plate_z for the z-position of the sensor from the top
sensor_dist_from_nozzle for the y-offset.
3D FREUNDE PLA
No rafts, no brim, no supports. Just flip it to the side for printing.
print_version = true; ...lazy me...)