Mounted Rudolph Head

by phenoptix, published

Mounted Rudolph Head by phenoptix Nov 16, 2012


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag


Thing Statistics

15197Views 4023Downloads Found in Decor


Only a slight variation from the Deer / Reindeer head I published a couple of days ago. This has the revised slots so you can mount it easier and also a 10mm hole in the nose piece that allows you to add a red LED throwie to give it a certain Rudolphiness.

After a number of requests! http://www.phenoptix.com/products/laser-cut-deer-reindeer-rudolph-head


Cut out and slot together. Then grab your glue-gun, tape, a 10mm red LED and a coin cell battery. Glue the red LED into the nose piece, put the coin cell betwixt the legs of the LED so that the LED lights up and then tape it round so it stays on.
Viola! Instant guilt free Xmas hunting lodge feel for your living room.

More from Decor

view more

All Apps

Upgrade this Thing with Thingiverse Apps

No results.

yes 1/8 or 3mm is the ideal

phenoptix, these are really cool and simple to print. When it came to assembly things were a bit on the snug side, so I am guessing this was designed for 1/8 plywood, I was not thinking and just used some 1/4 stock :)