2 inch Whopper Plopper printed in one piece.
I uploaded a bigger 10cm long version, because when you just upscale the small version it gets a bit tail heavy. So i changed the air chamber for the bigger version. Upscale the Propeller to 180% for the bigger version.
0.5 - 0.6mm wire (please use strong spring wire, don´t use soft wire!)
M1 Screws (https://tinyurl.com/y7khpsse)
2 outer walls
0.2mm layer height for body and 0.1mm for propeller
Print orientation like on pic 4!
For build instructions scroll down!
Bend the wire like on the picture and insert it into the slot on the back
insert a small piece of wire into the hole to secure the first wire