These are 3D print panels that attach to C1-10P timber legs that I designed.
The 3D printed panels are designed to be keyhole slotted onto the timber legs for ease of removal, they could be glued in place as well if access is not required to the inside.
The 2 large exterior panels need to be placed on the keyed slots, both at the same time, and then both slid down into position.
These panels require the manufacture of the timber legs which the PDF file can be located on the Choppers Builders Group on Facebook in the files section.
I hope it helps people with their C1-10P builds.
Some of the larger panels will print vertically with no infill as the supports are integrated and the overhangs are less than 60°.
The fins on the right leg panel are designed to be cut off and filed back flush.