Original was pretty close to what I wanted except that I wanted to mount an SSD with the Slim optical drive in the same 5.25" bay so added holes to mount SSD to bottom. Also none of the screw holes for the slim optical drive matched up with my drive so I made new ones. I used slots rather than holes to make it more versatile for drives. I left most of the old holes (apparently they work for some drives)... anyway not the prettiest design but it works well for me.
Note that there was no easy way to get the screw into the thin part of drive so I designed to just use a large screw and tighten down enough against the drive to keep from shifting up on that side. The other thick side, the slots should line up with the two screw holes.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.