Designed this variant to hold the Legacy Power Morpher underneath Saba. This allows both items to be displayed along side the helmet. This was designed for the Legacy Variant of Saba, but may work with the original one from the 90s.
NOTE: This version is 199mm tall, and should be printable on any printer with a 200x200x200 print area or larger.
Gizmodo Dorks ABS
Prints fine on a 200x200x200 bed. If you print loops to prime your nozzle, I'd recommend limiting it to 2 loops at 1mm distance from the object.
There is some play in the cup rest for the handle and the channel for the "blade." I intend to cut some strips of felt and glue them in there to give it a more snug fit and also protect the dagger from being scratched should it be picked up and set back down over and over. The felt is not required as there is plenty of space, but it would help it stand up and not shift as much if bumped.