Sense 3D Scanner Rotating Holder
by MapSoft, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Sense 3D Scanner holder that can be rotated from vertical to horizontal or any angle in between while attached to the lid of your laptop. Very sturdy design.
This is printed at .2 mm though I would have gone for .1 mm but it would have taken too long. I used a 50% infil as I wanted it as strong as possible. Once printed place your 3D Sense in one half of the holder along with the disc rotation attachment for rotation and then place the other half on top. Better to make sure holes are wide enough after printing and enlarge where necessary. Firmly squeeze together and sorted! Have fun...
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sense 3D Scanner Rotating Holder by MapSoft is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MapSoft a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MapSoft would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).