A very handy bracket that fits the MÅLA drawing paper rolls from IKEA perfectly.
You can mount the roll on a wall or like I did on the side of a desk.
Print each of the files twice. There is no left and right part because the bracket is countersunk on each ending. The holes for the four screws are 5mm in diameter.
For installation mount the brackets 45cm apart, maybe a few millimeters more. Then hold the roll in place and screw in the bolts with a coin. Do not tighten them to much or you are going to have a hard time getting them out when you put a new roll in. Keep in mind that one of them turns counterclockwise.