Here's 2 size of Google Cloud logo earrings. I do not own the copyrights to the logo.We are using the Google Cloud Platform at work and their logo is adorable. I have about 15 different items of swag but sadly no earrings and since I enjoy doing those I figured I would give it a try. I made a first pair and showed them to our contact from Google and they loved them. I felt they were pretty flimsy and was not ready to share the previous model with them so I made this brand new one that is pretty much what I envisioned,
You have to print either the 43mm size or the 34mm the file marked smaller are the ones for the 34mm. You will have to add 2 pieces of all the colors except the white as they are already in pair.
Depending on the filament you use you might have to scale the white base by 1-3%. I already made the model a little bigger so you shouldn't have to fight too much.
I basically pushed the pieces with the back of a spoon into place(they should snap and hold). Start with the blue as it's the easiest to align, then red, yellow and finally green.
If they don't pressure fit you could use a little crazy glue to hold the pieces but I printed the files I just shared as is on my prusa mk2s and everything snapped pretty good.
Shout out to the amazing Google Montreal team :) Took me a while but here they are ! See you all at Google Next 2019.