This is a work in progress (V1 untested)
15-April-2019 Corrected some missing levels icons of the TFT and added an emergency Stop in the custom menu to use when working with Octoprint.
3-April-2019 Move the MKS Main Board up to 4.2mm so that some boards with longer legs below the power connectors clears the support base.
20-March-2019 Remove the vent inlet on the V1 side panel, made a left side panel for the vent inlet to improve airflow.
Removed 0.3mm version of the slip parts, since it's intended for printing on the mini, 0.4mm is mandatory.
19-March-2019 Added 0.3mm and 0.4mm gaps versions, I found that printing on the mini 0.3mm was too tight so I added the 0.4mm, rename the others 0.3mm.
Also added a version for the Mini V1 with space for a 40x10mm fan and the bed wires mod as requested, it is not tested.
Modified the MKS base plate bracket so that all main boards version fit (not tested).
17-March-2019 Noon Modified MKS Gen L to have room for the USB connector and some tweaks Sidepanel and the retaining wall on the MKS.
Added Marlin 1.1.9 and Touchscreen Files that works as of right now. Instructions on how to install them in a future video on my Youtube channel, I add them in advance for those who wants to experiment on their own.
17-March-2019 Morning Moved the USB connector on the side panel 1.5mm up, it was bending the bottom plate...
17-March-2019 Added to new MKS GEN Bracket that will support the new side panel USB Type-B connector. Also added the side panel with and without a bed wire passtrough.
I am installing an MKS Gen L motherboard and TFT24 touchscreen on my Monoprice Mini V2, with a full Marlin 1.1.9 and Linear Advance.
I am documenting everything on my youtube channel
Monoprice Mini V2 Mod Playlist.
I am making this available ahead of the videos to give time to print those.
You have split versions of the Faceplate and MKS Gen L support brackets that can be print with the Mini. And full version for bigger printers. Make sure you first layer is not too much squished down.