An other case for GameHAT. I think it is for Rev 1.2 with square L/R buttons and the on/off switch on upper part of the case (need a confimation).
Laterals setting switches are part of the lower part of the case and work well for me.
The top part have square shape in order to link top and bottom part flush, so it need to be printed with supports.
Supports can help also for the part called "Boitier" ( the lower part of the case) to help the print of screws housing and the batterie hole.
anyone PLA or other
All the parts could be in wrong side for print, change position in your slicer before. I didn't find the setting in order to make the .stl in good orientation... sorry.
For one complet kit you need (sorry names are in french) :
- 1 Boitier (lower part)
- 1 Facade (upper part)
- 1 Switch on/off
- 2 Gachette-R-L (L and R buttons)
- 1 trappe a pile vis (for screwed version)
- or 1 trappe a pile magnet (for magnet version with Ø10x2mm magnets glued)