This is a work in progress case for the Delta5 and Rotorhazard Tracking System.
It fits 100x100mm Delta5 PCBs, a Raspberry Pi 3B+ (all USB are useable) and a 40mm fan. It just juses 3 Screws to hold the parts in place.
Optimised airflow over cooling fins or the RX5808 shields, consistent RSSI tracking (i had problems on Node 4 with the square case where the Pi sits above the Arduino Nodes).
If you have any ideas/improvements, just PM me. Maybe i'll do a version with screws for the top.
You need two M3x8 and 2 nuts for the PCBs and one or two M3x12 for the fan
Edit: i added two parts to testfit everything without printing the bottom and the walls