This file allows the Thule ski racks to be used on the round 1-1/8" Yakima roof rails. The design currently does not allow you to lock the ski racks to your roof rails, so use at your own risk.You will need to have the hardware from the original square bar plastic adapters originally provided. In addition you will also need the following items:
x8 1/4" nuts
x8 1/4" bolts (minimum length is 1")
x8 1/4" washers
x4 OEM Metal tab, bolt, and nut
Black tape, glue or zip ties to secure OEM bolts in printed part
3 Walls minimum
50% infill minimum
Solid infill every 10 layers
Solid infill areas less than 100 mm^2
Use a stronger, yet flexible filament. PETG or a Carbon Fiber filament is recommended (DO NOT USE PLA).
Priline Carbon Fiber PC-Max
Add a solid infill layer every 10 or so layers and set the slicing software to solid infill if the are is less than 100 mm^2.