Yet another 65mm whoop frame, but this one is designed to be printed specifically in CF.
Pick a stiff and durable enough filament, the basic stuff won't work with this thing.
Print slow, like 10-15mm/s. Print and assemble exactly as shown.
You will need 4 gummies about 4mm tall for the flight controller soft mounting. Those squeeze in neatly in the holes in the top plate. Your donor whoop probably comes with those already, just make sure they're not taller than 4mm.
And then you'll need 4 about 6-7mm tall screws (M1.4x6 I think?) to secure the top plate to the bottom plate posts, all through the canopy of your choice.
Oh, and the canopy is not my design, it's taken from another design on thingiverse.
If you want a remix for 75mm, please do send me a whoop that size (I always test all of my models). Or make it yourself.
Print with perimeters only so that there is no infill. Add like 6 or 7 (2.4-2.8mm wall width) or more with a 0.4mm nozzle.