This is an additional tool head to be used with the Hypercube EVO NGEN from Nedalive.
This will allow to use a dual extruder chimera on the printer, allowing to print dual color/dual material.
Design have been tested already, but this is still a draft version. Next improvement will be to change the design to add a fan for the part, and maybe a better cooling on the head itself.
Only use ABS or any similar material with a glass transition >= 100deg. as the cooling part can still get really hot when using both extruder in extreme condition (printing ABS with both head at 250deg...). I recorded ~60-70deg on the cooling part
T0 ; X=0.00 Y=0.00 Z=0.00
T1 ; X=18.00 Y=0.00 Z=0.00
BL Touch ; X=9.00 Y=72.5 Z=depend on your machine
To be adjusted on your own machine.
If people are interested, I will also write a small guide on how to reconfigure Simplify 3D --> Octoprint --> Klipper to allow the tool changement.