Hard Case, Custom

by DarynFinney Jun 2, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Since you made it in Solidworks, would you mind posting the Solidworks files?

I've been neglecting my profile here for a few years and am just now seeing your comment. I'm uploading SLDPRT and STEP files, can't seem to find the assembly. Also, the only models I could locate were after I designed in supports for printing. Hope this helps.

Would it be possible to get a version that has a solid floor? Also, what were the setting you used to print this? i also have a replicator 2x and my initial print of the base did not turn out as good as your pictures.
Would it be possible to have a flat bottom and top? that makes the print more difficult

It needs to be rotated and printed with the bottom flat on the print surface. I will go ahead and upload a model file with solid bottom and top, but will keep the triangular grooves. They really do aid in removing such a large object from the print surface, and remain characteristic of the design.
I used the standard settings for ABS: 0.2 layer height, no raft or supports (model has supports designed into it), extrusion temp 230C, print platform 110C on Kapton tape.
Thanks for the interest in my model :)