Stratus LED's makes a great 14,000 LED module, but you need to make a way to mount it. They designed a flashlight handle, but it is not a rugged solution as it has all of the electronics exposed.
It has about a 1 hour run time at full power with the battery I linked.
With this wiring setup nothing is powered until the rocker switch is flipped. Once the switch is flipped the battery indicator, the push button switch, and the LED driver are powered. After that you can push the push button switch to activate the LED.
I was able to cut out the holes with a jigsaw and a metal cutting blade fairly easily. Cut the holes for the cooling grills with the center about an inch forward of the heatsink. This allows the air to blow out through the sides of the box.
Print all of the parts and then attach with the bolts.
Attach the battery holder with VHB tape.
Wire everything up using the wiring guide photo.
More from Electronics
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving geofox a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.