An x-axis carriage for an E3D V6 bowden setup. It has mounts for the original fan from the Anet A8 and a Bltouch probe.
For the assembly you will need:
12x M4x8 raised countersunk screws for the carriage itself
2x M3x14 cylinder head screws for the v6 holder
2x M3x18 cylinder head screws for the beltholder
2x M3x10 raised countersunk screws for the fan mount
2x M3x8 raised countersunk screws for the bltouch mount
2x M3 screws with nuts to fix the bltouch to the mount
2x M3 screws with nuts to attach the fan to the holder
You can screw the bolts in the holes without counter nuts but i recommend drilling these holes out with a 2.5mm drill bit so that you won't destroy the part.
Here is the position for the Bltouch:
define X_PROBE_OFFSET_FROM_EXTRUDER 37
define Y_PROBE_OFFSET_FROM_EXTRUDER 0
define Z_PROBE_OFFSET_FROM_EXTRUDER 2.5
If i forgot something ask me.
You can print everything without support.