Loading
drewbrewchan

608 Bearing Replacement (print in place/fully printable)

by drewbrewchan Mar 21, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

I can't get mine to break free, can you share with me the tolerances that you used in modeling the bearings?

If you have trouble with sticking bearings best bet is to lower your extrusion rate by 1-2%. I dont remember exactly but all the tolerances are around 0.2mm. If you need it, heres a tiny tolerance test I devised recently, might help you see what your printer is capable of ;) takes like 2 mins.

https://www.thingiverse.com/thing:3555815

Tiny Tolerance Test for 0.4mm Nozzle 0.1-0.4mm Incremental by 0.02mm

This one printed really good. Works perfect in the spannerhands spool holder.

Thats awesome! :D I’m glad you found it useful ;) If you can, please post a make so others can see. Most people find it helpful to see a make before deciding to print something :)