GIRO - Full Graphic Smart Controller Knob
This is not an actual remix of the original design made by mightynozzle. This is a completely new designed knob for the Full Graphic Smart Controller case which was made by mightynozzle. It comes in two versions because I noticed that there are two different encoder versions on the market. Make sure to pick the right one for your full graphic smart controller. The outer diameter of the knob is 25mm.
This is the first intended prototype and design.
I would recommend to use exactly 2 perimeters. Print with a lower speed, for example 30 mm/s, to get a more accurate printing. I recommend to print it with 100% Infill to make it solid because there are already intended free spaces in the design.
Let me know if there are any kind of problems with the knob. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this knob.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work. For all of you who gave me a tip.