UPDATE (17/04/19): Added STEP file and Firmware HEX (tiny machines firmware customized), be careful hotend maxtemp set to 300, cant set it through the screen but you can through gcode or direct commands.I need it to hot tightening the volcano hotend. Build size set to 300 x 300 x 400 mm.
Please feel free to share slicer settings!
This a mount to install a E3D V6 with the volcano upgrade on a CR-10s Pro.
If you use this part your nozzle position will change and you will have to update your firmware to the new offsets. I'm this is part of a work in progress, I dont have the firmware setting yet.
All holes that could need support have been filled with a sacrificial layer of 0.15mm so you can just punch through them to open the holes after printing, print at 150 layer height or the slicer will not recognize de layer.
Before I posted a remix from a prusa mk3 extruder to fit the same volcano on de CR-10s Pro, I you don't like the petsfang fan duct here is the link: https://www.thingiverse.com/thing:3498526
THANKS TO TINY MACHINES FOR THEIR FIRMWARE,TO ONEBADMARINE FOR THE BRACKET MODEL AND TO PRUSA FOR SHARING THEIR EXTRUDER DESIGN AND BEING AWESOME.