This is a modular mini car for Playmobil kids. It consists of 3 different parts, the top part, the bottom part and a wheel (x4).
It is easy to print and assemble.
You can print with different colors or print with white and paint it after (like I did :).
neema 3d PLA
- print speed 60mm/s
- support infill 14%
- no skirt
- cooling fan to 80% after 4th layer
- adjust speed for layers below 15s
- remove the supports from the top part
- sand the chair, the handles, and the small vertical clips on the bottom part
- if the tires are too tight drill or sand them a little
- paint it if you want
painted with acrylic colors..
ready to assemble!