v5 is updated to have a slightly wider and deeper cut for the charger so there will be much less friction against the chargers housing and therefore not scratch it so much
This is a keyring holder for your MOTIV ring charger. They used to come with a steel keychain holder in the box but no longer do. This would use the magnets in the USB stick charger to keep it secured while traveling. But they don't make them anymore so if you have a second charger or didn't get one of these steel holders you're basically S.o.L.
This uses a Ceramic 11/16 Inch Disc magnet. I bought them months ago here smile.amazon.com/gp/product/B071J3FNDF/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
The disc magnet will press fit for testing but should be super glued in place to be safe.
Feel free to remix/remodel to fit your magnets instead if you'd rather but I find these ones perfectly strong enough to hold the charger in place but not make it painfully hard to remove.
Check back often as I'm constantly tweaking the design! [will keep each iteration available]
Printed in PLA, sliced with S3D.
.12mm Layer, 5 walls on top, bottom, and shell.
220C on the Nozzle, 65C on the bed for maximum layer melting/adhesion. This feels insanely strong.
Took 40 Minutes with 60mm/s default speed and 75% external underspeed for barely perceptible layers