Frame Mounted Camera and Pi Case for Prusa MK3s

by Plaidbear Mar 26, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Where can I find files to make the robot featured in the pics?

Here is the one I printed https://www.thingiverse.com/thing:2797622 I printed it at 20% infill .2 layer height and had to use a rubber mallet to break the leg joint connections to get it to move. It worked for me but I was a bit nervous I would instead snap the leg right off.

Maker Faire Robot - Fixed
by philggg

How much further does this extend in the front compared to the screen that was there before? This is important for those with an enclosure.

I measured the front mounted default LCD to extend 80 from the black front frame. When you move the LCD to the side with my other mod, and place this mod on the front frame, this camera frame mod now extends 160 from the black front frame. Another measurement I made it that if you pull the bed all the way forward, then it extends 97mm further from the extended bed to the arm's elbow joint front side.

Does the rpi case have the opening for the camera ribbon?

Nice design

I made an alternate case part that has the camera ribbon slit if you want to use a Pi Camera.