This RaspberryPi case is designed for the RaspberryPi 3B but will eventually fit the RaspberryPi 3B+. The design is made with a special attention for practicability, tidiness and order and is suitable to use it in installations with a number of RaspberryPis.
The Case consists of two parts, a wall mounted bottom part and a numbered top part (01,02,03,04). There are a number of variations available with different orientations (left, right, top, bottom) and different ways of mounting, like the side holed variation which can be mounted without opening the case. The top and bottom parts are interchangeable, one fits all.
Slim RaspberryPi 2B+ Case M2.5 Wall Mounted is a remix of Jooxoe3i's original design (https://www.thingiverse.com/thing:711669). It was altered to work with DIN912 M2.5 hexagon screws.
I have never printed this model on a FDM printer, i only got SLS prints. Since it is a remix you can probably find good printing settings at the original.
I would be very happy if somebody could provide some insights!
The whole design is made in Fusion360 and publicly available via the following link:
The font used is a modfied VHS Mono. If you want to use your own text look at the "blank" and the "note" version of the top part.
Feel free to produce more variations!
Combine a top and a bottom part of the same orientation (left, right, bottom, or top), if you want them to be easily removed choose the side holed versions. Both parts are assembled with 4 x M2.5 Hexagon Screws 16mm in the top part and 4 press fitted nuts in the bottom part.
Before you assemble the case use the bottom part as a stencil to mark where you want to drill the holes in the wall!
To assemble the case you need:
1 x Hexagon Key (M2.5)
4 x M2.5 Hexagon Screws 16mm
4 x M2.5 Nuts
2 x M2.9 Flat Head Screws
2 x Wall plugs for the Flat Head Screws