Parametric brass drying / reloading tray that is editable via OpenSCAD.
Print any size your 3D Printer can handle and any cartridge held in the cartridge_data.scad file. add your own as well.
Download the zip file for the scad files to make the drying trays.
No further edits planned. If you run into issues let us know.
Print as high temp as you can. 260C(500F) is good. These trays are designed to be baked. ABS works, I am sure other filament types will work, but whatever is used needs to be able to handle a minimum of 93C(200F).
A friend needed a tray that would hold brass neck down to drain after washing. Also, wanted to be able to use these in an oven at 180F to completely dry the brass cases.
Two methods available to accomplish this: 1) spikes sticking up and 2) base plate with holes to fit the cartridge.
took the cartridge data from SAAMI (https://saami.org/technical-information/cartridge-chamber-drawings/) and using these measurements create a tray based on the size desired.
this does work.
Also, a very big THANK YOU goes to HarlanDmii the designer of: https://www.thingiverse.com/thing:16193 this made my job a lot easier.
If you run into trouble and the comments/ramblings in the file do not help; drop me a message and I will try to help figure it out. The response may not be quick though.