Please note if you have customised the bed type or bed position to lower than stock the adjacent Bed levelling adjustment bolt may conflict with the top of the housing. With the standard set up the bottom of the bolts clears by at least 10 mm (see uploaded images).
This thing attaches to the Ender 3 Pro via the top front screw to the right of the printer and at the end of the 40\40 base extrusion using the existing bolt.
1.The thing includes an aperture to allow access to the USB port.
2.Storage for 1 x SD & 1 x Micro SD card and a card orientation symbol.
3.Cable tie apertures to help tidy ribbon cable
1.Insert adaptor into housing.
2.Tidy excess ribbon cable with an elastic band.
3.Fasten with cable tie if necessary.
5.Carefully insert Micro SD jack into appropriate slot.
6.Fix to lid via 1 x existing hex bolt to end of 40\40 extrusion.
1.The main body is printed vertically and does not need any supports. I have also included a break away foot pad to aid stability when printing so it does not need a raft.
2.Body printed @ 50 mms 0.2 resolution and 20 % infill on a Ender 3 Pro..
More from 3D Printer Parts
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving BoothyBoothy a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.