For CHM-T36 PnP, print the juki_nozzle_base_CHMT36.stl.
For CHM-36VA /48VA /48V PnP, print juki_nozzle_base_CHMT36XX.stl.
Make sure to check the margin of your working area before installing the accessory, to avoid crashing the Pick and Place head against Nozzle holder.
Secure the Nozzle Holder to the Base with the M3 socket screw and the hex nut. For the Charmhigh CHM-T36 snap the base to the front right side of the machine and you are done!. Installing the base on the Charmhigh CHM-T36VA /48VA /48VB require two (2) additional 5M screws to secure the base and can be installed on either side of the PnP.
I'm including the source files in case adjustments are required.
More from Parts
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving mafe72 a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.