Creality Ender 3 Pro TL Smoother Housing

by bettapro Mar 31, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Thx, great cover!

I made it with 20% infill, should have done 100%, it's a bit wobbly.

I had problems with mounting the fan. While tightening the screw the hole/bolt broke out (while screw was still loose).
I solved the problem with some little 1.5 mm washers. I attached the file for them.

The 4th cover screw from the top is a bit problem. The screw don't really get grip in it. Maybe you can make a version for adding a M3 nut to it (which would also mean you would need an other screw for this...)?

For mounting the smoothers I needed to cut all the wires of the sockets on the backside. And the side to "insert" in the cover also needs to get filed plane to get them in. Having the file in the hand anyway, I also filed the 4 corners of the board a little bit and they glided in easy.

I don't know if the print quality improved, but the noise level is much lower.