Loading
Gilly42

raspberry pi case with support for 80mm fan and stepdown psu

by Gilly42 Apr 9, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Could you makes one for Rock Pi 4, needs some adjustments because of the heat sink.

The Rock Pi 4 has the same dimensions as the Raspberry Pi 3 which should change are the anchor points, in this version for the Raspyberry has 2 anchoring plates that are on the bottom of the plate.
It would be necessary to change the position of these 2 points and add the other 2 anchor points, this is neccessary because the Rock Pi 4 has a quande heatsink at the bottom.
Please enter the website of the Radxa wiki and look for (3D drawing STP) you will find a 3d model of the board and I recommend looking for the photos of the board with the big heatsink so you can see what is necessary to modify in your model.
After the modification this model will remain compatible with the Raspberry Pi 3 the change are few.
thanks for listening.

thx you for your comment.
i'm not 100% happy with this case. the walls could be thicker and some details can be improved. I made it with tinkercad (the links to the original files are in the things detail). At the time, i learn how to use fusion 360, when I master this, i maybe re-build this in fusion. at this time i can try to make the changes you want. but dont wait for me, if you find a better case go with it.

I would be grateful if you make a version for Rock PI 4